Flanged Window Install Guide for High Performance Enclosures
Sequencing For Making Flanged Windows Airtight
Flanged windows are ubiquitous in American construction.As we push toward higher levels of enclosure performance;- with increased insulation levels, airtightness and vapor control;- window specifications are getting more robust tooAnd while it can be a relatively straightforward thing to select a better window, it isn't so readily clear how to match it with a better installation.
Let's make a high performance installation too Download the guide here (PDF).
Simple is Better
It needn't be complicated.
There are a few key concepts that guide us:
- Absolute control layer continuity: of water, air, insulation, and vapor control - from component to component.
- Maximize drying potential, to build drying reserves and a safety buffer.In cold and mixed climates this means vapor open toward exterior and vapor variable toward interior.
- Durable and cost effective: with quality components, properly installed, the installation should exceed the life of the windows, no call backs and no up-charges.
Armed with these three commandments, we breakdown, tweak, and repackage the familiar steps of installing a flanged window.
The WRB is a high-performance three layer monolithic membrane;- SOLITEX Mento 1000: waterproof, airtight and vapor open.We make connections in a weather-lapped fashion, always starting at the bottom and overlapping materials as we work up, assuring proper drainageEXTOSEAL Encors, a self-sealing, highly form fitting butyl-acrylic adhesive forms the sill pan.Face tape with;CONTEGA Solido EXO, a vapor open, airtight and waterproof SOLID acrylic adhesive with highly form-fitting fleece backing.One may also face tape with;TESCON Vana, waterproof, airtight and vapor permeable all-around SOLID acrylic tape.
DO NOT FACE TAPE WITH VAPOR IMPERMEABLE TAPE: IT DAMS MOISTURE IN THE WALL
Because the WRB is our outboard airtight layer the connection to the flange and window must be continuous all the way around - this includes at the sill and heads.We are making a waterproof enclosure so moisture intrusion should be minimal, but in case there is some moisture intrusion, the vapor permeable nature of the flat taping assures drying capability and protection from damages.
If the framing cavity is insulated, there should be an airtight and vapor variable control layer inboard of the insulation.INTELLO Plus is the most robust smart vapor retarder available and is extremely airtight. Connecting the membrane to the window becomes essential - for moisture protection, comfort and efficiency. We make these connections with TESCON Profect or Profil tapes.With split release paper backing, these tapes are made for making tight inside corner connections.We show how to premake corners so that these tightest of spots are successfully dealt with.
Download the Guide
We hope you find this step-by-step instruction guide useful. DOWNLOAD HERE (PDF).Complete your high-performance enclosure with with a high performance flanged window install.